Devuan logs - #459, boring messages

Message sent to [email protected], [email protected]:

Subject: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Reply-To: Ryutaroh Matsumoto <[email protected]>, [email protected]
Resent-From: Ryutaroh Matsumoto <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
Resent-Date: Sat, 16 May 2020 08:18:01 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
Date: Sat, 16 May 2020 17:03:18 +0900 (JST)
Message-Id: <[email protected]>
To: Devuan Bug Tracking System <[email protected]>
From: Ryutaroh Matsumoto <[email protected]>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Package: autopkgtest
Version: 5.13.1
Severity: minor
Tags: beowulf ceres
Control: found -1 5.10

Dear Maintainer,

"man autopkgtest-virt-qemu" says:
REQUIREMENTS
       autopkgtest-virt-qemu  assumes  that you have already prepared a suitable Debian based QEMU image (see BUILDING IMAGES below for how to create them).
       But you can use any VM which has python3 or python installed and either

       *   opens a root shell on ttyS1, or

       *   has a serial console on ttyS0 where you can log in (getty or similar) with specified user and password. This will then be used to  start  a  root
           shell on ttyS1, to reduce this to the first case and to not assume that ttyS0 stays operational throughout the whole test.

But autopkgtest-build-qemu does not adjust /etc/inittab inside the qemu image,
and autopkgtest-virt-qemu always fails.
Workaround is easy, just modify /etc/inittab in the qemu image.

This issue is found in package versions 5.13.1 and 5.10.

Best regards, Ryutaroh Matsumoto


-- System Information:
Distributor ID:	Debian
Description:	Devuan GNU/Linux 3 (beowulf)
Release:	3
Codename:	beowulf
Architecture: x86_64

Kernel: Linux 4.19.0-9-amd64 (SMP w/2 CPU cores)
Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8), LANGUAGE=ja_JP.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages autopkgtest depends on:
ii  apt-utils       1.8.2.1
ii  libdpkg-perl    1.19.7
ii  procps          2:3.3.15-2+devuan1
ii  python3         3.7.3-1
ii  python3-debian  0.1.35

Versions of packages autopkgtest recommends:
ii  autodep8  0.18

Versions of packages autopkgtest suggests:
pn  lxc               <none>
pn  lxd               <none>
ii  ovmf              0~20181115.85588389-3+deb10u1
pn  qemu-efi-aarch64  <none>
pn  qemu-efi-arm      <none>
pn  qemu-system       <none>
ii  qemu-utils        1:3.1+dfsg-8+deb10u5
pn  schroot           <none>
ii  vmdb2             0.13.2+git20190215-1

-- no debconf information

Message sent:

Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-Mailer: MIME-tools 5.509 (Entity 5.509)
Content-Type: text/plain; charset=utf-8
X-Loop: [email protected]
From: "Devuan bug Tracking System" <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>
Subject: bug#459: Acknowledgement (autopkgtest-build-qemu does not set up
 /dev/ttyS[01])
Message-ID: <[email protected]>
References: <[email protected]>
X-Devuan-PR-Message: ack 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: beowulf ceres
Reply-To: [email protected]
Date: Sat, 16 May 2020 08:18:04 +0000

Thank you for filing a new bug report with Devuan.

You can follow progress on this bug here: 459: https://bugs.devuan.org/cgi/=
bugreport.cgi?bug=3D459.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 [email protected]

If you wish to submit further information on this problem, please
send it to [email protected].

Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.

--=20
459: https://bugs.devuan.org/cgi/bugreport.cgi?bug=3D459
Devuan Bug Tracking System
Contact [email protected] with problems

Message received at [email protected]:

Date: Sat, 16 May 2020 17:03:18 +0900 (JST)
Message-Id: <[email protected]>
To: Devuan Bug Tracking System <[email protected]>
Subject: autopkgtest-build-qemu does not set up /dev/ttyS[01]
From: Ryutaroh Matsumoto <[email protected]>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Package: autopkgtest
Version: 5.13.1
Severity: minor
Tags: beowulf ceres
Control: found -1 5.10

Dear Maintainer,

"man autopkgtest-virt-qemu" says:
REQUIREMENTS
       autopkgtest-virt-qemu  assumes  that you have already prepared a suitable Debian based QEMU image (see BUILDING IMAGES below for how to create them).
       But you can use any VM which has python3 or python installed and either

       *   opens a root shell on ttyS1, or

       *   has a serial console on ttyS0 where you can log in (getty or similar) with specified user and password. This will then be used to  start  a  root
           shell on ttyS1, to reduce this to the first case and to not assume that ttyS0 stays operational throughout the whole test.

But autopkgtest-build-qemu does not adjust /etc/inittab inside the qemu image,
and autopkgtest-virt-qemu always fails.
Workaround is easy, just modify /etc/inittab in the qemu image.

This issue is found in package versions 5.13.1 and 5.10.

Best regards, Ryutaroh Matsumoto


-- System Information:
Distributor ID:	Debian
Description:	Devuan GNU/Linux 3 (beowulf)
Release:	3
Codename:	beowulf
Architecture: x86_64

Kernel: Linux 4.19.0-9-amd64 (SMP w/2 CPU cores)
Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8), LANGUAGE=ja_JP.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages autopkgtest depends on:
ii  apt-utils       1.8.2.1
ii  libdpkg-perl    1.19.7
ii  procps          2:3.3.15-2+devuan1
ii  python3         3.7.3-1
ii  python3-debian  0.1.35

Versions of packages autopkgtest recommends:
ii  autodep8  0.18

Versions of packages autopkgtest suggests:
pn  lxc               <none>
pn  lxd               <none>
ii  ovmf              0~20181115.85588389-3+deb10u1
pn  qemu-efi-aarch64  <none>
pn  qemu-efi-arm      <none>
pn  qemu-system       <none>
ii  qemu-utils        1:3.1+dfsg-8+deb10u5
pn  schroot           <none>
ii  vmdb2             0.13.2+git20190215-1

-- no debconf information

Message sent to [email protected], [email protected]:

Subject: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Reply-To: Mark Hindley <[email protected]>, [email protected]
Resent-From: Mark Hindley <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
Resent-Date: Sat, 16 May 2020 09:33:02 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
References: <[email protected]> <[email protected]>
Date: Sat, 16 May 2020 10:29:48 +0100
From: Mark Hindley <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>, [email protected]
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <[email protected]>
User-Agent: Mutt/1.10.1 (2018-07-13)

Control: tags -1 debian

Ryutaroh,

Thanks for this

On Sat, May 16, 2020 at 05:03:18PM +0900, Ryutaroh Matsumoto wrote:
> Package: autopkgtest
> Version: 5.13.1
> Severity: minor
> Tags: beowulf ceres
> Control: found -1 5.10
> 
> Dear Maintainer,
> 
> "man autopkgtest-virt-qemu" says:
> REQUIREMENTS
>        autopkgtest-virt-qemu  assumes  that you have already prepared a suitable Debian based QEMU image (see BUILDING IMAGES below for how to create them).
>        But you can use any VM which has python3 or python installed and either
> 
>        *   opens a root shell on ttyS1, or
> 
>        *   has a serial console on ttyS0 where you can log in (getty or similar) with specified user and password. This will then be used to  start  a  root
>            shell on ttyS1, to reduce this to the first case and to not assume that ttyS0 stays operational throughout the whole test.
> 
> But autopkgtest-build-qemu does not adjust /etc/inittab inside the qemu image,
> and autopkgtest-virt-qemu always fails.
> Workaround is easy, just modify /etc/inittab in the qemu image.
> 
> This issue is found in package versions 5.13.1 and 5.10.

autopkgtest is not a forked package and Devuan uses Debian's packages directly.

Can you report this to Debian BTS, please?

Thanks

Mark

Message received at [email protected]:

Received: (at 459) by bugs.devuan.org; 16 May 2020 09:30:03 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Sat, 16 May 2020 09:30:03 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id AA257F60C92
	for <[email protected]>; Sat, 16 May 2020 11:29:51 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jZt8e-00024o-LU; Sat, 16 May 2020 10:29:48 +0100
Received: (nullmailer pid 24073 invoked by uid 1000);
	Sat, 16 May 2020 09:29:48 -0000
Date: Sat, 16 May 2020 10:29:48 +0100
From: Mark Hindley <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>, [email protected]
Subject: Re: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Message-ID: <[email protected]>
References: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <[email protected]>
X-Debbugs-No-Ack: No Thanks
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=-0.0 required=5.0 tests=SPF_PASS autolearn=disabled
	version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Control: tags -1 debian

Ryutaroh,

Thanks for this

On Sat, May 16, 2020 at 05:03:18PM +0900, Ryutaroh Matsumoto wrote:
> Package: autopkgtest
> Version: 5.13.1
> Severity: minor
> Tags: beowulf ceres
> Control: found -1 5.10
> 
> Dear Maintainer,
> 
> "man autopkgtest-virt-qemu" says:
> REQUIREMENTS
>        autopkgtest-virt-qemu  assumes  that you have already prepared a suitable Debian based QEMU image (see BUILDING IMAGES below for how to create them).
>        But you can use any VM which has python3 or python installed and either
> 
>        *   opens a root shell on ttyS1, or
> 
>        *   has a serial console on ttyS0 where you can log in (getty or similar) with specified user and password. This will then be used to  start  a  root
>            shell on ttyS1, to reduce this to the first case and to not assume that ttyS0 stays operational throughout the whole test.
> 
> But autopkgtest-build-qemu does not adjust /etc/inittab inside the qemu image,
> and autopkgtest-virt-qemu always fails.
> Workaround is easy, just modify /etc/inittab in the qemu image.
> 
> This issue is found in package versions 5.13.1 and 5.10.

autopkgtest is not a forked package and Devuan uses Debian's packages directly.

Can you report this to Debian BTS, please?

Thanks

Mark

Message sent to [email protected], [email protected]:

X-Loop: [email protected]
Subject: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Reply-To: Ryutaroh Matsumoto <[email protected]>, [email protected]
Resent-From: Ryutaroh Matsumoto <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
X-Loop: [email protected]
Resent-Date: Sat, 16 May 2020 09:48:02 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: followup 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
References: <[email protected]> <[email protected]> <[email protected]>
Received: via spool by [email protected] id=B459.158962200327319
          (code B ref 459); Sat, 16 May 2020 09:48:02 +0000
Received: (at 459) by bugs.devuan.org; 16 May 2020 09:40:03 +0000
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Sat, 16 May 2020 09:40:03 +0000 (UTC)
Received: from mail001.nap.gsic.titech.ac.jp (mail001.nap.gsic.titech.ac.jp [131.112.13.101])
	by vm6.ganeti.dyne.org (Postfix) with SMTP id ECBB9F60CC6
	for <[email protected]>; Sat, 16 May 2020 11:33:31 +0200 (CEST)
Received: from 172.22.40.205
	by mail001.nap.gsic.titech.ac.jp with Mail2000 ESMTP Server V7.00(2613:1:AUTH_RELAY)
	(envelope-from <[email protected]>); Sat, 16 May 2020 18:33:27 +0900 (JST)
Received: from mail002.nap.gsic.titech.ac.jp (mail002.nap.gsic.titech.ac.jp [131.112.13.102])
	by drweb08.nap.gsic.titech.ac.jp (Postfix) with SMTP id 5006AEB;
	Sat, 16 May 2020 18:33:27 +0900 (JST)
Received: from 114.145.251.241
	by mail002.nap.gsic.titech.ac.jp with Mail2000 ESMTPA Server V7.00(2641:1:AUTH_LOGIN)
	(envelope-from <[email protected]>); Sat, 16 May 2020 18:33:26 +0900 (JST)
Date: Sat, 16 May 2020 18:33:26 +0900 (JST)
Message-Id: <[email protected]>
To: [email protected]
Cc: [email protected]
From: Ryutaroh Matsumoto <[email protected]>
In-Reply-To: <[email protected]>
X-Mailer: Mew version 6.8 on Emacs 26.3
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Spam-Status: No, score=-2.3 required=5.0 tests=RCVD_IN_DNSWL_MED
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Dear Mark, Thank you for your attention and response. But,

> autopkgtest is not a forked package and Devuan uses Debian's packages directly.
> Can you report this to Debian BTS, please?

I don't think this is a Debian issue.
Debian PID 1 is systemd,
and with systemd ttyS[01] are available
in autopkgtest-built qemu images.

I believe "tag debian" should be removed.

Best regards, Ryutaroh

From: Mark Hindley <[email protected]>
Subject: Re: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Date: Sat, 16 May 2020 10:29:48 +0100

> Control: tags -1 debian
> 
> Ryutaroh,
> 
> Thanks for this
> 
> On Sat, May 16, 2020 at 05:03:18PM +0900, Ryutaroh Matsumoto wrote:
>> Package: autopkgtest
>> Version: 5.13.1
>> Severity: minor
>> Tags: beowulf ceres
>> Control: found -1 5.10
>> 
>> Dear Maintainer,
>> 
>> "man autopkgtest-virt-qemu" says:
>> REQUIREMENTS
>>        autopkgtest-virt-qemu  assumes  that you have already prepared a suitable Debian based QEMU image (see BUILDING IMAGES below for how to create them).
>>        But you can use any VM which has python3 or python installed and either
>> 
>>        *   opens a root shell on ttyS1, or
>> 
>>        *   has a serial console on ttyS0 where you can log in (getty or similar) with specified user and password. This will then be used to  start  a  root
>>            shell on ttyS1, to reduce this to the first case and to not assume that ttyS0 stays operational throughout the whole test.
>> 
>> But autopkgtest-build-qemu does not adjust /etc/inittab inside the qemu image,
>> and autopkgtest-virt-qemu always fails.
>> Workaround is easy, just modify /etc/inittab in the qemu image.
>> 
>> This issue is found in package versions 5.13.1 and 5.10.
> 
> autopkgtest is not a forked package and Devuan uses Debian's packages directly.
> 
> Can you report this to Debian BTS, please?
> 
> Thanks
> 
> Mark

Message sent:

Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-Mailer: MIME-tools 5.509 (Entity 5.509)
Content-Type: text/plain; charset=utf-8
X-Loop: [email protected]
From: "Devuan bug Tracking System" <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>
Subject: bug#459: Info received (bug#459: autopkgtest-build-qemu does not
 set up /dev/ttyS[01])
Message-ID: <[email protected]>
References: <[email protected]>
X-Devuan-PR-Message: ack-info 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
Reply-To: [email protected]
Date: Sat, 16 May 2020 09:48:04 +0000

Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 [email protected]

If you wish to submit further information on this problem, please
send it to [email protected].

Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.

--=20
459: https://bugs.devuan.org/cgi/bugreport.cgi?bug=3D459
Devuan Bug Tracking System
Contact [email protected] with problems

Message sent to [email protected], [email protected]:

X-Loop: [email protected]
Subject: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Reply-To: Mark Hindley <[email protected]>, [email protected]
Resent-From: Mark Hindley <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
X-Loop: [email protected]
Resent-Date: Sat, 16 May 2020 10:03:01 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: followup 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Received: via spool by [email protected] id=B459.158962260427428
          (code B ref 459); Sat, 16 May 2020 10:03:01 +0000
Received: (at 459) by bugs.devuan.org; 16 May 2020 09:50:04 +0000
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Sat, 16 May 2020 09:50:04 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id 5AB62F60CBC
	for <[email protected]>; Sat, 16 May 2020 11:41:44 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jZtK9-0002Ac-TO; Sat, 16 May 2020 10:41:41 +0100
Received: (nullmailer pid 32264 invoked by uid 1000);
	Sat, 16 May 2020 09:41:41 -0000
Date: Sat, 16 May 2020 10:41:41 +0100
From: Mark Hindley <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <[email protected]>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=-0.0 required=5.0 tests=SPF_PASS autolearn=disabled
	version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

On Sat, May 16, 2020 at 06:33:26PM +0900, Ryutaroh Matsumoto wrote:
> Dear Mark, Thank you for your attention and response. But,
> 
> > autopkgtest is not a forked package and Devuan uses Debian's packages directly.
> > Can you report this to Debian BTS, please?
> 
> I don't think this is a Debian issue.
> Debian PID 1 is systemd,

No. Both sysvinit and runit-init are available in Debian. So this issue would be
present on a Debian system not running systemd as PID1.

Best wishes

Mark

Message sent:

Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-Mailer: MIME-tools 5.509 (Entity 5.509)
Content-Type: text/plain; charset=utf-8
X-Loop: [email protected]
From: "Devuan bug Tracking System" <[email protected]>
To: Mark Hindley <[email protected]>
Subject: bug#459: Info received (bug#459: autopkgtest-build-qemu does not
 set up /dev/ttyS[01])
Message-ID: <[email protected]>
References: <[email protected]>
X-Devuan-PR-Message: ack-info 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
Reply-To: [email protected]
Date: Sat, 16 May 2020 10:03:03 +0000

Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 [email protected]

If you wish to submit further information on this problem, please
send it to [email protected].

Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.

--=20
459: https://bugs.devuan.org/cgi/bugreport.cgi?bug=3D459
Devuan Bug Tracking System
Contact [email protected] with problems

Message sent to [email protected], [email protected]:

X-Loop: [email protected]
Subject: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Reply-To: Ryutaroh Matsumoto <[email protected]>, [email protected]
Resent-From: Ryutaroh Matsumoto <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
X-Loop: [email protected]
Resent-Date: Sat, 16 May 2020 10:03:08 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: followup 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Received: via spool by [email protected] id=B459.158962320227509
          (code B ref 459); Sat, 16 May 2020 10:03:08 +0000
Received: (at 459) by bugs.devuan.org; 16 May 2020 10:00:02 +0000
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Sat, 16 May 2020 10:00:02 +0000 (UTC)
Received: from mail001.nap.gsic.titech.ac.jp (mail001.nap.gsic.titech.ac.jp [131.112.13.101])
	by vm6.ganeti.dyne.org (Postfix) with SMTP id 74DFDF60C8D
	for <[email protected]>; Sat, 16 May 2020 11:56:14 +0200 (CEST)
Received: from 172.22.40.202
	by mail001.nap.gsic.titech.ac.jp with Mail2000 ESMTP Server V7.00(2611:0:AUTH_RELAY)
	(envelope-from <[email protected]>); Sat, 16 May 2020 18:56:13 +0900 (JST)
Received: from mail001.nap.gsic.titech.ac.jp (mail001.nap.gsic.titech.ac.jp [131.112.13.101])
	by drweb05.nap.gsic.titech.ac.jp (Postfix) with SMTP id 02BA167C;
	Sat, 16 May 2020 18:56:13 +0900 (JST)
Received: from 114.145.251.241
	by mail001.nap.gsic.titech.ac.jp with Mail2000 ESMTPA Server V7.00(2600:0:AUTH_LOGIN)
	(envelope-from <[email protected]>); Sat, 16 May 2020 18:56:11 +0900 (JST)
Date: Sat, 16 May 2020 18:56:11 +0900 (JST)
Message-Id: <[email protected]>
To: [email protected]
Cc: [email protected]
From: Ryutaroh Matsumoto <[email protected]>
In-Reply-To: <[email protected]>
X-Mailer: Mew version 6.8 on Emacs 26.3
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Spam-Status: No, score=-2.3 required=5.0 tests=RCVD_IN_DNSWL_MED
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

>> I don't think this is a Debian issue.
>> Debian PID 1 is systemd,
> 
> No. Both sysvinit and runit-init are available in Debian. So this issue would be
> present on a Debian system not running systemd as PID1.

Umm, but is there any option to instruct autopkgtest to
make a Debian qemu image with PID 1 not being systemd?
I do not know such an option.

How can anybody reproduce this issue on Debian??
Do you have any idea?

Best regards, Ryutaroh


From: Mark Hindley <[email protected]>
Subject: Re: bug#459: autopkgtest-build-qemu does not set up /dev/ttyS[01]
Date: Sat, 16 May 2020 10:41:41 +0100

> On Sat, May 16, 2020 at 06:33:26PM +0900, Ryutaroh Matsumoto wrote:
>> Dear Mark, Thank you for your attention and response. But,
>> 
>> > autopkgtest is not a forked package and Devuan uses Debian's packages directly.
>> > Can you report this to Debian BTS, please?
>> 
>> I don't think this is a Debian issue.
>> Debian PID 1 is systemd,
> 
> No. Both sysvinit and runit-init are available in Debian. So this issue would be
> present on a Debian system not running systemd as PID1.
> 
> Best wishes
> 
> Mark

Message sent:

Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-Mailer: MIME-tools 5.509 (Entity 5.509)
Content-Type: text/plain; charset=utf-8
X-Loop: [email protected]
From: "Devuan bug Tracking System" <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>
Subject: bug#459: Info received (bug#459: autopkgtest-build-qemu does not
 set up /dev/ttyS[01])
Message-ID: <[email protected]>
References: <[email protected]>
X-Devuan-PR-Message: ack-info 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
Reply-To: [email protected]
Date: Sat, 16 May 2020 10:03:10 +0000

Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 [email protected]

If you wish to submit further information on this problem, please
send it to [email protected].

Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.

--=20
459: https://bugs.devuan.org/cgi/bugreport.cgi?bug=3D459
Devuan Bug Tracking System
Contact [email protected] with problems

Message sent to [email protected], [email protected]:

X-Loop: [email protected]
Subject: bug#459: Progress after #461 fixed?
Reply-To: Mark Hindley <[email protected]>, [email protected]
Resent-From: Mark Hindley <[email protected]>
Resent-To: [email protected]
Resent-CC: [email protected]
X-Loop: [email protected]
Resent-Date: Wed, 08 Feb 2023 18:14:01 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: followup 459
X-Devuan-PR-Package: autopkgtest
X-Devuan-PR-Keywords: ceres debian beowulf
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Received: via spool by [email protected] id=B459.16758799223707
          (code B ref 459); Wed, 08 Feb 2023 18:14:01 +0000
Received: (at 459) by bugs.devuan.org; 8 Feb 2023 18:12:02 +0000
Delivered-To: [email protected]
Received: from email.devuan.org [2001:41d0:2:d06e::5c4:2612]
	by doc.devuan.org with IMAP (fetchmail-6.4.16)
	for <debbugs@localhost> (single-drop); Wed, 08 Feb 2023 18:12:02 +0000 (UTC)
Received: from email.devuan.org
	by email.devuan.org with LMTP
	id 8vtiG8Xl42OGPQAAmSBk0A
	(envelope-from <[email protected]>)
	for <[email protected]>; Wed, 08 Feb 2023 18:11:17 +0000
Received: by email.devuan.org (Postfix, from userid 109)
	id 604A4B14; Wed,  8 Feb 2023 18:11:17 +0000 (UTC)
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on email.devuan.org
X-Spam-Level: 
X-Spam-Status: No, score=0.4 required=5.0 tests=RDNS_DYNAMIC,SPF_PASS
	autolearn=no autolearn_force=no version=3.4.6
Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=193.36.131.86; helo=mx.hindley.org.uk; [email protected]; receiver=<UNKNOWN> 
Received: from mx.hindley.org.uk (193-36-131-86.cfwn.uk [193.36.131.86])
	by email.devuan.org (Postfix) with ESMTPS id 5DE0384;
	Wed,  8 Feb 2023 18:11:12 +0000 (UTC)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1pPouM-0005K7-OP; Wed, 08 Feb 2023 18:11:02 +0000
Received: (nullmailer pid 13644 invoked by uid 1000);
	Wed, 08 Feb 2023 18:11:02 -0000
Date: Wed, 8 Feb 2023 18:11:02 +0000
From: Mark Hindley <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>, [email protected], [email protected]
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <[email protected]>

Control: tags -1 moreinfo

Ryutaroh,

On Sat, May 16, 2020 at 07:09:31PM +0900, Ryutaroh Matsumoto wrote:
> I have no idea on how to work around #461, and without a workaround or a right
> fix to #461, fixes to #459 or #460 do not have much value, as autopkgtest
> remains completely unusable with qemu testbed, besides #459 and #460 have easy
> workarounds.
> 
> I will put my effort on #460 after #461 finds a workaround or a fix.

Now #461 is fixed, did you get resolutions for #460 and #459?

Thanks

Mark

Message received at [email protected]:

Received: (at 459) by bugs.devuan.org; 8 Feb 2023 18:12:02 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from email.devuan.org [2001:41d0:2:d06e::5c4:2612]
	by doc.devuan.org with IMAP (fetchmail-6.4.16)
	for <debbugs@localhost> (single-drop); Wed, 08 Feb 2023 18:12:02 +0000 (UTC)
Received: from email.devuan.org
	by email.devuan.org with LMTP
	id 8vtiG8Xl42OGPQAAmSBk0A
	(envelope-from <[email protected]>)
	for <[email protected]>; Wed, 08 Feb 2023 18:11:17 +0000
Received: by email.devuan.org (Postfix, from userid 109)
	id 604A4B14; Wed,  8 Feb 2023 18:11:17 +0000 (UTC)
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on email.devuan.org
X-Spam-Level: 
X-Spam-Status: No, score=0.4 required=5.0 tests=RDNS_DYNAMIC,SPF_PASS
	autolearn=no autolearn_force=no version=3.4.6
Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=193.36.131.86; helo=mx.hindley.org.uk; [email protected]; receiver=<UNKNOWN> 
Received: from mx.hindley.org.uk (193-36-131-86.cfwn.uk [193.36.131.86])
	by email.devuan.org (Postfix) with ESMTPS id 5DE0384;
	Wed,  8 Feb 2023 18:11:12 +0000 (UTC)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1pPouM-0005K7-OP; Wed, 08 Feb 2023 18:11:02 +0000
Received: (nullmailer pid 13644 invoked by uid 1000);
	Wed, 08 Feb 2023 18:11:02 -0000
Date: Wed, 8 Feb 2023 18:11:02 +0000
From: Mark Hindley <[email protected]>
To: Ryutaroh Matsumoto <[email protected]>, [email protected], [email protected]
Subject: Progress after #461 fixed?
Message-ID: <[email protected]>
References: <[email protected]>
 <[email protected]>
 <[email protected]>
 <[email protected]>
 <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <[email protected]>
X-Debbugs-No-Ack: No Thanks

Control: tags -1 moreinfo

Ryutaroh,

On Sat, May 16, 2020 at 07:09:31PM +0900, Ryutaroh Matsumoto wrote:
> I have no idea on how to work around #461, and without a workaround or a right
> fix to #461, fixes to #459 or #460 do not have much value, as autopkgtest
> remains completely unusable with qemu testbed, besides #459 and #460 have easy
> workarounds.
> 
> I will put my effort on #460 after #461 finds a workaround or a fix.

Now #461 is fixed, did you get resolutions for #460 and #459?

Thanks

Mark