Devuan logs - #473, boring messages

X-Loop: [email protected]
Subject: bug#473: pulseaudio: 00-disable-autospawn.conf needs a systemd specific line commented out.
Reply-To: Paul Beardsell <[email protected]>, [email protected]
Resent-From: Paul Beardsell <[email protected]>
Resent-To: [email protected]
Resent-CC: Dima Krasner <[email protected]>
X-Loop: [email protected]
Resent-Date: Fri, 22 May 2020 13:18:02 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: report 473
X-Devuan-PR-Package: pulseaudio
X-Devuan-PR-Keywords: patch
Received: via spool by [email protected] id=B.15901530032124
          (code B); Fri, 22 May 2020 13:18:02 +0000
Received: (at submit) by bugs.devuan.org; 22 May 2020 13:10:03 +0000
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Fri, 22 May 2020 13:10:03 +0000 (UTC)
Received: from multiwiki.com (ec2-35-179-91-180.eu-west-2.compute.amazonaws.com [35.179.91.180])
	(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id 3B431F60AA4
	for <[email protected]>; Fri, 22 May 2020 15:07:51 +0200 (CEST)
Received: from ip-172-21-21-4.eu-west-2.compute.internal ([172.21.21.4] helo=yogi.multiwiki.com)
	by multiwiki.com with esmtp (Exim 4.92)
	(envelope-from <[email protected]>)
	id 1jc7Ov-0002Qg-OX; Fri, 22 May 2020 14:07:49 +0100
Received: from psb by yogi.multiwiki.com with local (Exim 4.92)
	(envelope-from <[email protected]>)
	id 1jc7Ov-0002mH-KO; Fri, 22 May 2020 14:07:49 +0100
Content-Type: multipart/mixed; boundary="===============7518284314359375220=="
MIME-Version: 1.0
From: Paul Beardsell <[email protected]>
To: Devuan Bug Tracking System <[email protected]>
Message-ID: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
X-Mailer: reportbug 7.5.3+devuan3
Date: Fri, 22 May 2020 14:07:49 +0100
X-Spam-Status: No, score=0.4 required=5.0 tests=RDNS_DYNAMIC,SPF_HELO_PASS,
	SPF_PASS autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

This is a multi-part MIME message sent by reportbug.


--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Package: pulseaudio
Version: 12.2-4+deb10u1
Severity: grave
Tags: a11y patch
Justification: renders package unusable

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these template lines ***

Fresh Devuan install of beowulf.
Audio did not work.
The following patch needs to be applied to
/etc/pulse/client.conf.d/00-disable-autospawn.conf

diff --context=3 00-disable-autospawn.conf.0 00-disable-autospawn.conf
*** 00-disable-autospawn.conf.0	2019-08-15 16:21:19.000000000 +0100
--- 00-disable-autospawn.conf	2020-05-22 13:07:45.696629598 +0100
***************
*** 1,3 ****
  # On linux systems, disable autospawn by default
  # If you are not using systemd, comment out this line
! autospawn=no
--- 1,3 ----
  # On linux systems, disable autospawn by default
  # If you are not using systemd, comment out this line
! ### autospawn=no



-- Package-specific info:



-- System Information:
Distributor ID:	Debian
Description:	Devuan GNU/Linux 3 (beowulf)
Release:	3
Codename:	beowulf
Architecture: x86_64

Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages pulseaudio depends on:
ii  adduser                      3.118
ii  libasound2                   1.1.8-1
ii  libasound2-plugins           1.1.8-1
ii  libc6                        2.28-10
ii  libcap2                      1:2.25-2
ii  libdbus-1-3                  1.12.16-1+devuan2
ii  libelogind0 [libsystemd0]    241.4-2
ii  libeudev1 [libudev1]         3.2.7-6
ii  libgcc1                      1:8.3.0-6
ii  libice6                      2:1.0.9-2
ii  libltdl7                     2.4.6-9
ii  liborc-0.4-0                 1:0.4.28-3.1
ii  libpulse0                    12.2-4+deb10u1
ii  libsm6                       2:1.2.3-1
ii  libsndfile1                  1.0.28-6
ii  libsoxr0                     0.1.2-3
ii  libspeexdsp1                 1.2~rc1.2-1+b2
ii  libstdc++6                   8.3.0-6
ii  libtdb1                      1.3.16-2+b1
ii  libudev1                     1:3.2.7+devuan1.1
ii  libwebrtc-audio-processing1  0.3-1
ii  libx11-6                     2:1.6.7-1
ii  libx11-xcb1                  2:1.6.7-1
ii  libxcb1                      1.13.1-2
ii  libxtst6                     2:1.2.3-1
ii  lsb-base                     10.2019051400
ii  pulseaudio-utils             12.2-4+deb10u1

Versions of packages pulseaudio recommends:
pn  dbus-user-session                <none>
ii  libpam-elogind [libpam-systemd]  241.4-2
ii  rtkit                            0.11-6

Versions of packages pulseaudio suggests:
ii  eudev [udev]  3.2.7-6
pn  paman         <none>
ii  paprefs       1.0-1
ii  pavucontrol   3.0-4
pn  pavumeter     <none>
ii  udev          1:3.2.7+devuan1.1

-- no debconf information

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="client.conf"

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="daemon.conf"

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0

; flat-volumes = yes

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="default.pa"

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif


### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="system.pa"

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Enable positioned event sounds
load-module module-position-event-sounds

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-aplay_-L.xsHaud"

default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
pulse
    PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA Intel HDMI, HDMI 4
    HDMI Audio Output
dmix:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample mixing device
dmix:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample mixing device
dmix:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample mixing device
dmix:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct sample mixing device
dmix:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct sample snooping device
hw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Hardware device with all software conversions
usbstream:CARD=HDMI
    HDA Intel HDMI
    USB Stream Output
sysdefault:CARD=PCH
    HDA Intel PCH, ALC286 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC286 Analog
    Hardware device with all software conversions
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-pactl_list.JnJyUz"

Module #0
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "12.2"

Module #1
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "12.2"

Module #2
	Name: module-card-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "12.2"

Module #3
	Name: module-augment-properties
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "12.2"

Module #4
	Name: module-switch-on-port-available
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "David Henningsson"
		module.description = "Switches ports and profiles when devices are plugged/unplugged"
		module.version = "12.2"

Module #5
	Name: module-udev-detect
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "12.2"

Module #6
	Name: module-alsa-card
	Argument: device_id="0" name="pci-0000_00_03.0" card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "12.2"

Module #7
	Name: module-alsa-card
	Argument: device_id="1" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 1
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "12.2"

Module #8
	Name: module-native-protocol-unix
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "12.2"

Module #9
	Name: module-gsettings
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Sylvain Baubeau"
		module.description = "GSettings Adapter"
		module.version = "12.2"

Module #10
	Name: module-combine
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Compatibility module (module-combine rename)"
		module.version = "12.2"

Module #11
	Name: module-combine-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Combine multiple sinks to one"
		module.version = "12.2"

Module #12
	Name: module-default-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "12.2"

Module #13
	Name: module-rescue-streams
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "12.2"

Module #14
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.version = "12.2"

Module #15
	Name: module-intended-roles
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "12.2"

Module #16
	Name: module-suspend-on-idle
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "12.2"

Module #17
	Name: module-console-kit
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "12.2"

Module #18
	Name: module-systemd-login
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "12.2"

Module #19
	Name: module-position-event-sounds
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "12.2"

Module #20
	Name: module-role-cork
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "12.2"

Module #21
	Name: module-filter-heuristics
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "12.2"

Module #22
	Name: module-filter-apply
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "12.2"

Sink #0
	State: RUNNING
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo
	Description: Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 98304 / 150% / 10.57 dB,   front-right: 98304 / 150% / 10.57 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latency: 22949 usec, configured 23220 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC286 Analog"
		alsa.id = "ALC286 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc131c000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC286"
		alsa.components = "HDA:10ec0286,17aa3800,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-output-speaker: Speakers (priority: 10000)
		analog-output-headphones: Headphones (priority: 9000, not available)
	Active Port: analog-output-speaker
	Formats:
		pcm

Sink #1
	State: SUSPENDED
	Name: combined
	Description: Simultaneous output to Built-in Audio Analog Stereo
	Driver: module-combine-sink.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 11
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: combined.monitor
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.class = "filter"
		device.description = "Simultaneous output to Built-in Audio Analog Stereo"
		device.icon_name = "audio-card"
	Formats:
		pcm

Source #0
	State: IDLE
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Description: Monitor of Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
	Latency: 0 usec, configured 2000000 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc131c000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #1
	State: SUSPENDED
	Name: alsa_input.pci-0000_00_1b.0.analog-stereo
	Description: Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 74711 / 114% / 3.41 dB,   front-right: 74711 / 114% / 3.41 dB
	        balance 0.00
	Base Volume: 6554 /  10% / -60.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC286 Analog"
		alsa.id = "ALC286 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc131c000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC286"
		alsa.components = "HDA:10ec0286,17aa3800,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-input-internal-mic: Internal Microphone (priority: 8900)
		analog-input-mic: Microphone (priority: 8700, not available)
	Active Port: analog-input-internal-mic
	Formats:
		pcm

Source #2
	State: SUSPENDED
	Name: combined.monitor
	Description: Monitor Source of Simultaneous output to Built-in Audio Analog Stereo
	Driver: module-combine-sink.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 11
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: combined
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor Source of Simultaneous output to Built-in Audio Analog Stereo"
		device.class = "monitor"
		device.icon_name = "audio-input-microphone"
	Formats:
		pcm

Sink Input #4
	Driver: protocol-native.c
	Owner Module: 8
	Client: 5
	Sink: 0
	Sample Specification: float32le 2ch 44100Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "44100"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 98304 / 150% / 10.57 dB,   front-right: 98304 / 150% / 10.57 dB
	        balance 0.00
	Buffer Latency: 31020 usec
	Sink Latency: 22727 usec
	Resample method: copy
	Properties:
		application.icon_name = "google-chrome"
		media.name = "Playback"
		application.name = "Google Chrome"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "4273"
		application.process.user = "psb"
		application.process.host = "yogi"
		application.process.binary = "chrome"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0.0"
		application.process.machine_id = "abae60b220ebdafabd5f95995ec7bec4"
		module-stream-restore.id = "sink-input-by-application-name:Google Chrome"

Client #0
	Driver: protocol-native.c
	Owner Module: 8
	Properties:
		application.name = "xfce4-pulseaudio-plugin"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.version = "0.4.1"
		application.id = "org.xfce.pulseaudio-plugin"
		application.icon_name = "multimedia-volume-control"
		application.process.id = "3978"
		application.process.user = "psb"
		application.process.host = "yogi"
		application.process.binary = "wrapper-2.0"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0.0"
		application.process.machine_id = "abae60b220ebdafabd5f95995ec7bec4"

Client #1
	Driver: protocol-native.c
	Owner Module: 8
	Properties:
		application.name = "Google Chrome input"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "4273"
		application.process.user = "psb"
		application.process.host = "yogi"
		application.process.binary = "chrome"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0.0"
		application.process.machine_id = "abae60b220ebdafabd5f95995ec7bec4"

Client #5
	Driver: protocol-native.c
	Owner Module: 8
	Properties:
		application.name = "Google Chrome"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "4273"
		application.process.user = "psb"
		application.process.host = "yogi"
		application.process.binary = "chrome"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0.0"
		application.process.machine_id = "abae60b220ebdafabd5f95995ec7bec4"

Client #11
	Driver: protocol-native.c
	Owner Module: 8
	Properties:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "10327"
		application.process.user = "psb"
		application.process.host = "yogi"
		application.process.binary = "pactl"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "abae60b220ebdafabd5f95995ec7bec4"

Card #0
	Name: alsa_card.pci-0000_00_03.0
	Driver: module-alsa-card.c
	Owner Module: 6
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xc1318000 irq 54"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "160c"
		device.product.name = "Broadwell-U Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (priority: 5500, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4

Card #1
	Name: alsa_card.pci-0000_00_1b.0
	Driver: module-alsa-card.c
	Owner Module: 7
	Properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc131c000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-internal-mic: Internal Microphone (priority: 8900, latency offset: 0 usec)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec)
			Properties:
				device.icon_name = "audio-speakers"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-headphones"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

--===============7518284314359375220==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-pactl_info.SLqJwW"

Server String: /tmp/pulse-2L9K88eMlGn7/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 12
Tile Size: 65472
User Name: psb
Host Name: yogi
Server Name: pulseaudio
Server Version: 12.2
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: e057:a554

--===============7518284314359375220==--

Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-Mailer: MIME-tools 5.509 (Entity 5.509)
Content-Type: text/plain; charset=utf-8
X-Loop: [email protected]
From: "Devuan bug Tracking System" <[email protected]>
To: Paul Beardsell <[email protected]>
Subject: bug#473: Acknowledgement (pulseaudio: 00-disable-autospawn.conf
 needs a systemd specific line commented out.)
Message-ID: <[email protected]>
References: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
X-Devuan-PR-Message: ack 473
X-Devuan-PR-Package: pulseaudio
X-Devuan-PR-Keywords: patch
Reply-To: [email protected]
Date: Fri, 22 May 2020 13:18:06 +0000

Thank you for filing a new bug report with Devuan.

You can follow progress on this bug here: 473: https://bugs.devuan.org/cgi/=
bugreport.cgi?bug=3D473.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Dima Krasner <[email protected]>

If you wish to submit further information on this problem, please
send it to [email protected].

Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.

--=20
473: https://bugs.devuan.org/cgi/bugreport.cgi?bug=3D473
Devuan Bug Tracking System
Contact [email protected] with problems

X-Loop: [email protected]
Subject: bug#473: pulseaudio: 00-disable-autospawn.conf needs a systemd specific line commented out.
Reply-To: Mark Hindley <[email protected]>, [email protected]
Resent-From: Mark Hindley <[email protected]>
Resent-To: [email protected]
Resent-CC: Dima Krasner <[email protected]>
X-Loop: [email protected]
Resent-Date: Fri, 22 May 2020 17:48:02 +0000
Resent-Message-ID: <[email protected]>
Resent-Sender: [email protected]
X-Devuan-PR-Message: followup 473
X-Devuan-PR-Package: pulseaudio
X-Devuan-PR-Keywords: patch
References: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
Received: via spool by [email protected] id=B473.159016920418912
          (code B ref 473); Fri, 22 May 2020 17:48:02 +0000
Received: (at 473) by bugs.devuan.org; 22 May 2020 17:40:04 +0000
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Fri, 22 May 2020 17:40:04 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id E08D0F60D07
	for <[email protected]>; Fri, 22 May 2020 19:32:17 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jcBWo-00013A-2I; Fri, 22 May 2020 18:32:14 +0100
Received: (nullmailer pid 10835 invoked by uid 1000);
	Fri, 22 May 2020 17:32:13 -0000
Date: Fri, 22 May 2020 18:32:13 +0100
From: Mark Hindley <[email protected]>
To: [email protected], Paul Beardsell <[email protected]>
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=0.0 required=5.0 tests=FAKE_REPLY_C,SPF_PASS
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Control: forcemerge -1 276

Paul,

This is a well known issue and the configuration fix is documented in both
Debian Buster and Devuan Beowulf Release Notes. See
https://files.devuan.org/devuan_beowulf/Release_notes.txt

Thanks 

Mark

Received: (at 473) by bugs.devuan.org; 22 May 2020 17:40:04 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Fri, 22 May 2020 17:40:04 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id E08D0F60D07
	for <[email protected]>; Fri, 22 May 2020 19:32:17 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jcBWo-00013A-2I; Fri, 22 May 2020 18:32:14 +0100
Received: (nullmailer pid 10835 invoked by uid 1000);
	Fri, 22 May 2020 17:32:13 -0000
Date: Fri, 22 May 2020 18:32:13 +0100
From: Mark Hindley <[email protected]>
To: [email protected], Paul Beardsell <[email protected]>
Subject: Re: pulseaudio: 00-disable-autospawn.conf needs a systemd specific
 line commented out.
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
X-Debbugs-No-Ack: No Thanks
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=0.0 required=5.0 tests=FAKE_REPLY_C,SPF_PASS
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Control: forcemerge -1 276

Paul,

This is a well known issue and the configuration fix is documented in both
Debian Buster and Devuan Beowulf Release Notes. See
https://files.devuan.org/devuan_beowulf/Release_notes.txt

Thanks 

Mark

Received: (at 473) by bugs.devuan.org; 22 May 2020 17:40:04 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Fri, 22 May 2020 17:40:04 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id E08D0F60D07
	for <[email protected]>; Fri, 22 May 2020 19:32:17 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jcBWo-00013A-2I; Fri, 22 May 2020 18:32:14 +0100
Received: (nullmailer pid 10835 invoked by uid 1000);
	Fri, 22 May 2020 17:32:13 -0000
Date: Fri, 22 May 2020 18:32:13 +0100
From: Mark Hindley <[email protected]>
To: [email protected], Paul Beardsell <[email protected]>
Subject: Re: pulseaudio: 00-disable-autospawn.conf needs a systemd specific
 line commented out.
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <159015286960.9986.8421449620060443133.reportbug@yogi.multiwiki.com>
X-Debbugs-No-Ack: No Thanks
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=0.0 required=5.0 tests=FAKE_REPLY_C,SPF_PASS
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Control: forcemerge -1 276

Paul,

This is a well known issue and the configuration fix is documented in both
Debian Buster and Devuan Beowulf Release Notes. See
https://files.devuan.org/devuan_beowulf/Release_notes.txt

Thanks 

Mark

Received: (at control) by bugs.devuan.org; 3 Jun 2020 18:50:06 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Wed, 03 Jun 2020 18:50:06 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id BAD98F60930;
	Wed,  3 Jun 2020 20:44:05 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jgYMs-0008Ch-Mx; Wed, 03 Jun 2020 19:44:03 +0100
Received: (nullmailer pid 7254 invoked by uid 1000);
	Wed, 03 Jun 2020 18:44:01 -0000
Date: Wed, 3 Jun 2020 19:44:01 +0100
From: Mark Hindley <[email protected]>
To: Michaela Merz <[email protected]>
Cc: [email protected], [email protected]
Subject: Re: bug#480: Firefox - no sound
Message-ID: <[email protected]>
References: <CAKDb+y72X7wkXryAFm3-3FqVGr+a-xvFtkcS6NTH47zV803dmw@mail.gmail.com>
 <[email protected]>
 <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=-0.0 required=5.0 tests=SPF_PASS autolearn=disabled
	version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

reassign 480 pulseaudio
forcemerge 276 480


On Wed, Jun 03, 2020 at 12:06:42PM -0500, Michaela Merz wrote:
>    > > [1] http://files.devuan.org/devuan_beowulf/Release_notes.txt > >
>    --00000000000000808705a7310ed4 Content-Type: text/html; charset="UTF-8"
>    Content-Transfer-Encoding: quoted-printable
> 
>    Mark:
>    Rats. I enabled autospawn in client.conf, but forgot about
> 00-disable-autospawn.conf
> 
> Confirming that firefox works with audio now. Sory to bother you :(

Thanks.

Closing

Mark

Received: (at control) by bugs.devuan.org; 3 Jun 2020 18:50:06 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Wed, 03 Jun 2020 18:50:06 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id BAD98F60930;
	Wed,  3 Jun 2020 20:44:05 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jgYMs-0008Ch-Mx; Wed, 03 Jun 2020 19:44:03 +0100
Received: (nullmailer pid 7254 invoked by uid 1000);
	Wed, 03 Jun 2020 18:44:01 -0000
Date: Wed, 3 Jun 2020 19:44:01 +0100
From: Mark Hindley <[email protected]>
To: Michaela Merz <[email protected]>
Cc: [email protected], [email protected]
Subject: Re: bug#480: Firefox - no sound
Message-ID: <[email protected]>
References: <CAKDb+y72X7wkXryAFm3-3FqVGr+a-xvFtkcS6NTH47zV803dmw@mail.gmail.com>
 <[email protected]>
 <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=-0.0 required=5.0 tests=SPF_PASS autolearn=disabled
	version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

reassign 480 pulseaudio
forcemerge 276 480


On Wed, Jun 03, 2020 at 12:06:42PM -0500, Michaela Merz wrote:
>    > > [1] http://files.devuan.org/devuan_beowulf/Release_notes.txt > >
>    --00000000000000808705a7310ed4 Content-Type: text/html; charset="UTF-8"
>    Content-Transfer-Encoding: quoted-printable
> 
>    Mark:
>    Rats. I enabled autospawn in client.conf, but forgot about
> 00-disable-autospawn.conf
> 
> Confirming that firefox works with audio now. Sory to bother you :(

Thanks.

Closing

Mark

Received: (at control) by bugs.devuan.org; 3 Jun 2020 18:50:06 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Wed, 03 Jun 2020 18:50:06 +0000 (UTC)
Received: from mx.hindley.org.uk (mohindley.plus.com [81.174.245.179])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id BAD98F60930;
	Wed,  3 Jun 2020 20:44:05 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1jgYMs-0008Ch-Mx; Wed, 03 Jun 2020 19:44:03 +0100
Received: (nullmailer pid 7254 invoked by uid 1000);
	Wed, 03 Jun 2020 18:44:01 -0000
Date: Wed, 3 Jun 2020 19:44:01 +0100
From: Mark Hindley <[email protected]>
To: Michaela Merz <[email protected]>
Cc: [email protected], [email protected]
Subject: Re: bug#480: Firefox - no sound
Message-ID: <[email protected]>
References: <CAKDb+y72X7wkXryAFm3-3FqVGr+a-xvFtkcS6NTH47zV803dmw@mail.gmail.com>
 <[email protected]>
 <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAKDb+y5Z53mb4+xzNr64SQCOUH7FPf9+FOVt6ECYCxopeT=xWg@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=-0.0 required=5.0 tests=SPF_PASS autolearn=disabled
	version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

reassign 480 pulseaudio
forcemerge 276 480


On Wed, Jun 03, 2020 at 12:06:42PM -0500, Michaela Merz wrote:
>    > > [1] http://files.devuan.org/devuan_beowulf/Release_notes.txt > >
>    --00000000000000808705a7310ed4 Content-Type: text/html; charset="UTF-8"
>    Content-Transfer-Encoding: quoted-printable
> 
>    Mark:
>    Rats. I enabled autospawn in client.conf, but forgot about
> 00-disable-autospawn.conf
> 
> Confirming that firefox works with audio now. Sory to bother you :(

Thanks.

Closing

Mark

Received: (at 514) by bugs.devuan.org; 8 Oct 2020 16:50:04 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Thu, 08 Oct 2020 16:50:04 +0000 (UTC)
Received: from mx.hindley.org.uk (193-36-131-5.cfwn.uk [193.36.131.5])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id 7F0F7F604F2
	for <[email protected]>; Thu,  8 Oct 2020 18:40:05 +0200 (CEST)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1kQYxc-0004Hw-J4; Thu, 08 Oct 2020 17:40:08 +0100
Received: (nullmailer pid 11922 invoked by uid 1000);
	Thu, 08 Oct 2020 16:40:00 -0000
Date: Thu, 8 Oct 2020 17:40:00 +0100
From: Mark Hindley <[email protected]>
To: RhineDevil <[email protected]>, [email protected]
Subject: Re: bug#514: [libpulse0] pulseaudio not autospawning
Message-ID: <[email protected]>
References: <20201008151326.763d09e4@GALLIUM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201008151326.763d09e4@GALLIUM>
X-Debbugs-No-Ack: No Thanks
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=0.4 required=5.0 tests=RDNS_DYNAMIC,SPF_PASS
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

Control: reassign -1 pulseaudio
Control: forcemerge 276 -1 

On Thu, Oct 08, 2020 at 03:13:26PM +0200, RhineDevil wrote:
> Package: libpulse0
> Severity: normal
> 
> /etc/pulse/client.conf.d/00-disable-autospawn.conf is totally out of place,
> it's a fix intended only for systemd [in debian it's apparently systemd taking
> care of pulseaudio start] and should be removed from libpulse0 package in
> devuan, as it prevents pulseaudio from starting when an application requests
> its presence

This is already a known issue and the required configuration is in the release
notes: http://files.devuan.org/devuan_beowulf/Release_notes.txt

Thanks

Mark

Received: (at control) by bugs.devuan.org; 7 Nov 2020 10:20:02 +0000
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from tupac3.dyne.org [195.169.149.119]
	by doc.devuan.org with IMAP (fetchmail-6.4.0.beta4)
	for <debbugs@localhost> (single-drop); Sat, 07 Nov 2020 10:20:02 +0000 (UTC)
Received: from mx.hindley.org.uk (193-36-131-5.cfwn.uk [193.36.131.5])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by vm6.ganeti.dyne.org (Postfix) with ESMTPS id C495EF606F4
	for <[email protected]>; Sat,  7 Nov 2020 11:12:11 +0100 (CET)
Received: from apollo.hindleynet ([192.168.1.3] helo=hindley.org.uk)
	by mx.hindley.org.uk with smtp (Exim 4.84_2)
	(envelope-from <[email protected]>)
	id 1kbLCi-0001Ie-NA
	for [email protected]; Sat, 07 Nov 2020 10:12:16 +0000
Received: (nullmailer pid 6632 invoked by uid 1000);
	Sat, 07 Nov 2020 10:12:09 -0000
Date: Sat, 7 Nov 2020 10:12:09 +0000
From: Mark Hindley <[email protected]>
To: [email protected]
Subject: Fix forcemerge 520
Message-ID: <[email protected]>
References: <3c7fc0f41990e17fbfe7870b51890c9e09c8e087@webmail>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <3c7fc0f41990e17fbfe7870b51890c9e09c8e087@webmail>
User-Agent: Mutt/1.10.1 (2018-07-13)
X-Spam-Status: No, score=0.4 required=5.0 tests=RDNS_DYNAMIC,SPF_PASS
	autolearn=disabled version=3.4.2
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on tupac3.dyne.org

forcemerge 276 520